A&P oral questions / General

Regulations, Maintenance Forms, Records, and Publications: A&P oral exam questions

8 practice questions with answers for the Regulations, Maintenance Forms, Records, and Publications subject (AM.I.I) of the FAA Aviation Mechanic General oral exam. Say your answer out loud first, the way you will in front of the DME, then open the answer and check which points you covered.

AM.I.I.K1 · Knowledge · Privileges and limitations of a mechanic certificate

Even with a rating that covers the aircraft, what kinds of work are excluded from your general privileges as a certificated mechanic?

What the examiner listens for
  • Major repairs to, or major alterations of, propellers
  • Any repair to, or alteration of, instruments

A good answer: A certificated mechanic may not do major repairs or major alterations to propellers, and may not do any repair or alteration of instruments.

Likely follow-up: Besides the rating, what must you understand before you exercise your privileges on a specific job?

Reference: 14 CFR 65.81(a)

AM.I.I.K3 · Knowledge · Maintenance record entry for approval for return to service after maintenance and alterations

When you sign a maintenance record entry after a repair, what goes with your signature, and what exactly does that signature approve?

What the examiner listens for
  • Your certificate number and the kind of certificate you hold
  • The signature is the approval for return to servicebonus
  • It covers only the work performed, not the whole aircraft

A good answer: I sign and add my certificate number and the kind of certificate I hold. That signature is the approval for return to service, but only for the work I performed, not for the rest of the aircraft.

Likely follow-up: How is that different from the sign-off after a 100-hour inspection?

Reference: 14 CFR 43.9(a)(4)

AM.I.I.K6 · Knowledge · Maintenance terminology as defined in 14 CFR part 1 (e.g., time in service, maintenance, preventive maintenance, major alteration, major repair, minor alteration, minor repair)

In the regulatory sense, what makes a repair a major repair rather than a minor one?

What the examiner listens for
  • If improperly done it might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other airworthiness qualities
  • Or it is not done according to accepted practices or cannot be done by elementary operationsbonus
  • A minor repair is any repair that is not majorbonus

A good answer: A major repair is one that, if improperly done, might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other qualities affecting airworthiness, or one that is not done by accepted practices or cannot be done by elementary operations. Anything else is a minor repair.

Likely follow-up: Where in Part 43 would you find lists of major repairs?

Reference: FAA-H-8083-30B Glossary, Major repairs (14 CFR 1.1)

AM.I.I.K9 · Knowledge · Agency publications and guidance materials, including aircraft specifications, TCDSs, advisory circulars (AC), and airworthiness directives (AD)

What is an airworthiness directive, and under what conditions does the FAA issue one?

What the examiner listens for
  • It is issued when an unsafe condition exists in a product
  • And the condition is likely to exist or develop in other products of the same type designbonus
  • It is a legally enforceable rule, so compliance is mandatorybonus

A good answer: An AD is a legally enforceable rule. The FAA issues one when it finds an unsafe condition in an aircraft, engine, propeller, or appliance and that condition is likely to exist or develop in other products of the same type design. Compliance is mandatory.

Likely follow-up: What happens legally if the aircraft is operated without complying with an applicable AD?

Reference: 14 CFR 39.3, 39.5

AM.I.I.K11 · Knowledge · Manufacturer publications, including maintenance manuals, service bulletins, maintenance alerts, and master minimum equipment lists

What is a component maintenance manual, and how is it different from the aircraft maintenance manual?

What the examiner listens for
  • The component maintenance manual covers one specific item or component
  • It usually serves as the overhaul manual for that componentbonus
  • The aircraft maintenance manual covers the entire aircraft and its systemsbonus

A good answer: The component maintenance manual is focused on a specific component, such as a hydraulic pump or generator, and usually serves as its overhaul manual. The aircraft maintenance manual covers the whole aircraft and its systems.

Likely follow-up: Which manual would you use to evaluate structural damage on a large aircraft?

Reference: FAA-H-8083-30B Ch. 2, Manufacturers' Published Data, Maintenance Manuals

AM.I.I.K14 · Knowledge · Compliance requirements for manufacturer-specified maintenance and inspection intervals

When are a manufacturer's replacement times and inspection intervals mandatory rather than just recommendations?

What the examiner listens for
  • When they are in the Airworthiness Limitations section of the maintenance manual or Instructions for Continued Airworthiness
  • The aircraft may not be operated unless those times and intervals have been complied withbonus
  • Also when required by an AD or the approved inspection programbonus

A good answer: They are mandatory when they appear in the Airworthiness Limitations section of the manufacturer's maintenance manual or Instructions for Continued Airworthiness. The aircraft may not be operated unless those replacement times, inspection intervals, and related procedures have been complied with.

Likely follow-up: Is there any approved alternative to the intervals in that section?

Reference: 14 CFR 91.403(c)

AM.I.I.K19 · Knowledge · Inoperative equipment

A small piston airplane with no minimum equipment list has an inoperative item that is not required equipment. What must be done before it can be flown?

What the examiner listens for
  • The item must be removed, or deactivated and placarded Inoperative
  • If removed, the cockpit control is placarded and the work recorded under Part 43bonus
  • A pilot or appropriately rated mechanic must determine it is not a hazard to the aircraftbonus

A good answer: The inoperative item must either be removed, with the cockpit control placarded and the maintenance recorded, or be deactivated and placarded Inoperative. Any deactivation that involves maintenance is recorded under Part 43, and a pilot or mechanic must determine that the item does not constitute a hazard.

Likely follow-up: What kinds of equipment can never be left inoperative under that rule?

Reference: 14 CFR 91.213(d)(3)

AM.I.I.R1 · Risk management · Completeness or accuracy of documentation

The work is done but the record entry has not been made yet and the owner wants to fly. What is the problem, and what do you do?

What the examiner listens for
  • The aircraft may not be operated until the required maintenance record entry has been made
  • It must also be approved for return to service by an authorized personbonus
  • Complete and sign the entry before releasing the aircraftbonus

A good answer: An aircraft that has undergone maintenance may not be operated until it has been approved for return to service by an authorized person and the required maintenance record entry has been made. I complete and sign the entry before I release the aircraft.

Likely follow-up: What must that entry contain?

Reference: 14 CFR 91.407(a)

These are 8 of the 51 questions MockDME has for this subject. The other 43 are in the app, where the examiner voice asks, you answer by voice, and your answer is graded point by point.

Get the app when it launches

MockDME for iPhone asks these questions out loud, listens to your spoken answer, and tells you which points you covered and which you missed. One email on launch day, nothing else.

We use your address only for this one launch email and delete it afterwards. Privacy policy.

Practice questions written from the Aviation Mechanic Airman Certification Standards (FAA-S-ACS-1) and the FAA handbooks cited under each answer. They are not the examiner's actual questions: your DME picks those. Found an error? Tell us and we will fix it.

All 40 subjects