A&P oral questions / Airframe

Hydraulic and Pneumatic Systems: A&P oral exam questions

8 practice questions with answers for the Hydraulic and Pneumatic Systems subject (AM.II.F) of the FAA Aviation Mechanic Airframe oral exam. Say your answer out loud first, the way you will in front of the DME, then open the answer and check which points you covered.

AM.II.F.K1 · Knowledge · Hydraulic system components and fluids

What basic components does every hydraulic system need, besides the lines that carry the fluid?

What the examiner listens for
  • A pump
  • A reservoir
  • An actuator
  • Valves such as selector, check, and relief valves, plus a filterbonus

A good answer: A basic hydraulic system has a reservoir, a pump, an actuator, and control and protection parts: a selector or directional valve, a check valve, a pressure relief valve, and a filter.

Likely follow-up: What is the relief valve there for?

Reference: FAA-H-8083-31B Ch. 12, Basic Hydraulic Systems

AM.II.F.K2 · Knowledge · Hydraulic system operation

In a closed center system with a variable displacement pump, how is system pressure controlled?

What the examiner listens for
  • By the pump's own pressure compensator
  • The compensator reduces pump output as pressure reaches normal system pressurebonus
  • A relief valve is installed as a safety backupbonus

A good answer: The variable displacement pump has an integral pressure compensator that automatically reduces the pump's output as normal system pressure is reached. A system relief valve is the backup.

Likely follow-up: What controls pressure if a constant delivery pump is used instead?

Reference: FAA-H-8083-31B Ch. 12, Closed-Center Hydraulic Systems

AM.II.F.K4 · Knowledge · Hydraulic system inspection, check, servicing, and troubleshooting

When you disconnect a hydraulic line during maintenance, what do you do with the open line and fitting to keep contamination out?

What the examiner listens for
  • Cap or plug the open lines and fittings immediately
  • Clean the area around the fitting before disconnectingbonus
  • Keep tools and the work area cleanbonus

A good answer: Cap or plug all open lines and fittings immediately after disconnecting. It also helps to clean the area with dry-cleaning solvent before you disconnect anything.

Likely follow-up: What should be done with seals and gaskets when the component is reassembled?

Reference: FAA-H-8083-31B Ch. 12, Contamination Control

AM.II.F.K6 · Knowledge · Pneumatic system servicing requirements

After purging and draining a pneumatic system, what do you recharge it with, and what checks follow?

What the examiner listens for
  • Nitrogen or clean, dry compressed air
  • An operational checkbonus
  • An inspection for leaks and securitybonus

A good answer: Service the system with nitrogen or clean, dry compressed air, then give it a thorough operational check and inspect for leaks and security.

Likely follow-up: Why does it matter that the air is dry?

Reference: FAA-H-8083-31B Ch. 12, Pneumatic Power System Maintenance

AM.II.F.K8 · Knowledge · Types of hydraulic/pneumatic seals and fluid/seal compatibility

When you select a replacement O-ring, what is the most reliable way to be sure it is the right compound for the fluid?

What the examiner listens for
  • The part number on the sealed package or envelope
  • Color coding is not a reliable or complete means of identificationbonus

A good answer: Go by the basic part number on the O-ring's sealed envelope. Color codes are not reliable or complete, can be missing, and say nothing about size, age, or temperature limits.

Likely follow-up: What do you inspect a new O-ring for before installing it?

Reference: FAA-H-8083-31B Ch. 12, O-Ring Color Coding

AM.II.F.K10 · Knowledge · Pressure regulators, restrictors, and valves

In a system with a constant delivery pump, what are the two jobs of the pressure regulator?

What the examiner listens for
  • Keep system pressure within a predetermined range
  • Unload the pump when system pressure is in the normal range

A good answer: The regulator manages pump output to keep system pressure within a set range, and it unloads the pump, letting it turn without resistance, when system pressure is already in the normal range.

Likely follow-up: What backs up the regulator if it fails?

Reference: FAA-H-8083-31B Ch. 12, Pressure Regulators

AM.II.F.K11 · Knowledge · Filter maintenance procedures

What is the purpose of the bypass valve in a hydraulic filter?

What the examiner listens for
  • It opens if the filter element clogs
  • It allows continued flow so the systems keep operating

A good answer: If the element clogs, the bypass relief valve opens and lets fluid flow around it, so the aircraft systems keep working. Unfiltered flow is preferred over no flow at all.

Likely follow-up: How would you know on the ground that a filter has been clogged or bypassing?

Reference: FAA-H-8083-31B Ch. 12, Filter Bypass Valve

AM.II.F.R3 · Risk management · Storage and handling of hydraulic fluids

What protective equipment do you wear when handling hydraulic fluid?

What the examiner listens for
  • Proper gloves
  • Eye protection
  • A respirator if phosphate ester mist or vapor exposure is possiblebonus

A good answer: Always wear the proper gloves and eye protection with any hydraulic fluid. Where phosphate ester mist or vapor is possible, add a respirator that removes organic vapors and mists.

Likely follow-up: What does repeated skin contact with phosphate ester fluid lead to?

Reference: FAA-H-8083-31B Ch. 12, Health & Handling

These are 8 of the 37 questions MockDME has for this subject. The other 29 are in the app, where the examiner voice asks, you answer by voice, and your answer is graded point by point.

Get the app when it launches

MockDME for iPhone asks these questions out loud, listens to your spoken answer, and tells you which points you covered and which you missed. One email on launch day, nothing else.

We use your address only for this one launch email and delete it afterwards. Privacy policy.

Practice questions written from the Aviation Mechanic Airman Certification Standards (FAA-S-ACS-1) and the FAA handbooks cited under each answer. They are not the examiner's actual questions: your DME picks those. Found an error? Tell us and we will fix it.

All 40 subjects